ENGLISH
8
-
The suction power of the robot picks up loose dirt and transports it
through the suction opening into the dust container.
-
The robot comes with a dry wipe holder that allows you to clean your
Cleaning patterns
cleaning patterns to clean each area of the room optimally. The cleaning
patterns it uses are:
1
Z-pattern or zigzag pattern
2
Random pattern
3
Wall-following pattern
4
Spiral pattern
1
Z-pattern
2
Random pattern
3
Wall-following pattern
4
Spiral pattern
-
moving in Z-pattern again. The robot continues to use this sequence
or until it is switched off manually.
-
it switches to spiral mode and to turbo fan speed to ensure thorough
dirt removal.
Note: You can also select each mode individually by pressing the appropriate
button on the remote control or pointer (FC8820 only). For more details,
see chapter 'Using your robot', section 'Cleaning modes'.