Play / Pause; Select A Track; Siriusxm; Siriusxm Activation Process - Hertz HMR 50 Owner's Manual

Play / Pausa
- Press
to pause the track/song that is currently playing. The icon
- Press
to resume playing the track/song that has been paused.
The icon is displayed on the screen.

Select a Track

- Press
to move on to the previous track/song.
- Press
to go back to the next track/song.
Remark: playing order will depend on Bluetooth audio player. When
restart the current track depending on the duration of the playback. Some Bluetooth audio players may not
allow play/pause synchronization with this unit. Please make sure both the device and the main unit are in
the same play/pause status in BT Music mode.
9.8

SiriusXM

®
SiriusXM is where moments happen. The widest, deepest variety of music, ad-free. More games, more
sports, more coverage than anywhere. The most extensive entertainment, complete news coverage and
every kind of comedy. Listen in your car, on your phone, online and at home. A SiriusXM Connect Tuner
and subscription are required. For more information, visit www.siriusxm.com.

SiriusXM ACTIVATION PROCESS

1 Activating your SiriusXM Subscription
After installing your SiriusXM Connect Tuner and antenna, power on your HMR 50 and select
SiriusXM mode. You should be able to hear the SiriusXM preview channel on Channel 1. If you cannot
hear the preview channel, please check the installation instructions to make sure your SiriusXM.
Connect tuner is properly installed.
After you can hear the preview channel, tune to Channel 0 to find the Radio ID of your tuner.
In addition, the Radio ID is located on the bottom of the SiriusXM Connect Tuner and its packaging.
You will need this number to activate your subscription. Write the number down for reference.
Note: the SiriusXM Radio ID does not include the letters I, O, S or F.
In the USA, you can activate online or by calling SiriusXM Listener care:
• Visit www.siriusxm.com/activatenow.
• Call SiriusXM Listener Care at 1-866-635-2349.
For Canadian Subscriptions, please contact:
• Visit www.siriusxm.ca/activate.
• Call SiriusXM Customer Care at 1-888-539-7474.
As part of the activation process, the SiriusXM satellites will send an activation message to your tuner.
When your radio detects that the tuner has received the activation message, your radio will display:
SUBSCRIPTION UPDATED.
Once subscribed, you can tune to channels in your subscription plan. Note, the activation process
usually takes 10 to 15 minutes, but may take up to an hour. Your radio will need to be powered on
and receiving the SiriusXM signal to receive the activation message.
2 IDENTIFYING THE SiriusXM Connect Tuner RADIO ID NUMBER
The SiriusXM Radio ID is required for activation and can be found by tuning to Channel 0 as well as
by looking on the label found on the SiriusXM Connect Tuner and its packaging. The Radio ID does
not include the letters I, O, S or F.
20
is displayed on the screen.
is pressed some A2DP devices will