Table of Contents
Advertisement
LEVEL CONTROL MODE
Rotate VOL/SEL knob to highlight one of the available options:
- VARIABLE (default): the volume level of the signal output from this audio zone is variable and can
be controlled via the volume mixer ([ZONES] button).
- FIXED 4 VRMS MAX: the level of the output signal from this audio zone is fixed at 4Vrms. It will no
longer be possible to change the volume level for this zone until the "Variable" mode is selected.
- FIXED 2 VRMS MAX: the level of the output signal from this audio zone is fixed at 2Vrms.
It will no longer be possible to change the volume level for this zone until the "Variable" mode is selected.
- FIXED 1 VRMS MAX: the level of the output signal from this audio zone is fixed at 1Vrms.
It will no longer be possible to change the volume level for this zone until the "Variable" mode is selected.
- OFF: this audio zone is off. This zone will no longer play any sound until "Variable" or "Fixed" mode is selected.
Beep
Press VOL/SEL knob to enable
System
(FACTORY DEFAULT>SOFTWARE VERSION)
FACTORY DEFAULT
Press VOL/SEL knob, then select and press [YES] to restore all settings to the factory default values.
SOFTWARE VERSION
Press VOL/SEL knob to show the software version information.
Low Battery Alert (Notifies of low battery voltage condition).
Press VOL/SEL knob to enable
Remark: this notification alerts you when the 12VDC supply voltage drops below 10 volts. If enabled, the
device will enter safe mode and disable the audio output. A warning will also be displayed on the
screen with instructions to shut down the device until normal operating voltage is restored.
9.3
Tuner Operation (AM/FM)
Select tuner as Playing Source
/ SCR to access the SOURCE SELECTION menu.
1. Press
2. Rotate VOL/SEL knob to highlight the desired tuner mode,
press to select (FM>AM).
14
or disable
this function.
or disable
this function.
FM
long press KNOB to save
106.50
press Menu for Settings
Mhz
Station name
Radio text
12.5 V
Advertisement
Table of Contents
Troubleshooting
