Bluetooth Operation; Select Bluetooth As Playing Source; Pair Bluetooth Device; Disconnect Current Device - Hertz HMR 50 Owner's Manual

BLUETOOTH OPERATION

9.7

Select Bluetooth as Playing Source

1. Press / SCR to access the SOURCE SELECTION menu.
2. Rotate VOL/SEL knob to highlight BT, press to select.

Pair Bluetooth Device

Enable Bluetooth in your streaming device and scan for nearby devices, select HMR 50 from your list
of available devices to connect.

Disconnect Current Device

1 When the device is connected short press
2 Rotate VOL/SEL knob and select SELECT DEVICE. Press to select.
3 The device currently connected is highlighted with the icon
4 Rotate VOL/SEL knob to select the device currently connected and to be disconnected.
5 Press VOL/SEL knob to disconnect the selected device. The icon becomes

Connect Last Device

1 When the device is disconnected short press
2 Rotate VOL/SEL knob and select SELECT DEVICE. Press to select.
3 Rotate VOL/SEL knob to select the device to connect.
4 Press VOL/SEL knob to connect the device selected. The icon becomes

Remove a device from the list of paired devices

1 Short press
to access BT Setting.
2 Rotate VOL/SEL knob and select REMOVE DEVICE. Press to select.
3 Rotate VOL/SEL knob to select the device to remove.
4 Press VOL/SEL knob to remove the device selected.
WARNING:
please avoid operating your connected mobile phone while audio streaming as this may
cause noise or stuttering on the song playback. Audio streaming may or may not resume after
telephone interruption as this depends on the mobile phone used.
BT: phone name
Song name
Artist name
Album name
1:13 / 3:44 07 of 10
press Menu for Settings
to access BT Setting.
12.5 V
.
to access BT Setting.
Owner's Manual
19