Usb Mode Operation (When Usb Device Is Connected); Select Usb As Playing Source; Connecting A Usb Device; Select A Track - Hertz HMR 50 Owner's Manual

USB Mode Operation (available only when a USB device is connected)
9.5

Select USB as Playing Source

1. Press / SCR to access the SOURCE SELECTION menu.
2. Rotate VOL/SEL knob to highlight USB, press to select.

Connecting a USB device

- Insert a USB device into the USB port (please check the tech sheet at the end of this manual for details).
- To remove the USB device, you should select another source or turn off the power, in order to avoid.
- damaging the USB device. Then remove the USB device.

Select a Track

- Press to move to the next track/song. Press

Fast Forward/Fast Rewind

- Press and hold
- Press again and hold
- Press and hold
- Press to return to playback.

Play / Pause

- Press the to pause the track/song that is currently playing,
- Press the to resume playing the track/song that has been paused,

USB Setting Menu

1 Press
to enter the USB settings menu.
2 Rotate VOL/SEL knob to the desired option, press to select
(BROWSER>REPEAT>SHUFFLE).
3 Press
to go back to previous screen or exit from the menu.
BROWSER
Use VOL/SEL knob and
Rotate VOL/SEL knob to highlight the desired song or folder.
Press VOL/SEL knob to play the song or access the folder.
Press to exit from the current folder.
Press to exit the USB browsing (only if you are in the USB root).
Remark: the system exits from the USB browsing after a few seconds if no button is pressed.
USB
Song name
Artist name
Album name
Album cover
1:13 / 3:44
folder name
to fast forward through the track/song.
to speed up the progress.
to fast rewind through the track/song.
to browse the USB device content.
12.5 V
07 of 10
to go back to the previous track/song.
lights up.
lights up.
Owner's Manual
17