Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Rohde & Schwarz RT-ZP05S
Summary of Contents for Rohde & Schwarz RT-ZP05S
- Page 1 ® R&S RT-ZP05S Probe User Manual (;ÝÁH2) 1179512402 Version 02...
- Page 2 Rohde & Schwarz GmbH & Co. KG. Trade names are trademarks of the owners. ® 1179.5124.02 | Version 02 | R&S RT-ZP05S Throughout this manual, products from Rohde & Schwarz are indicated without the ® symbol, e.g. ® R&S RT-ZP05S is indicated as R&S RT-ZP05S.
-
Page 3: Safety And Regulatory Information
RT-ZP05S Safety and regulatory information The product documentation helps you use the R&S RT-ZP05S safely and effi- ciently. Follow the instructions provided here and throughout the manual. Use the product only for its intended use and within its performance limits. If the probe assembly is used in a manner not specified by the manufacturer, the pro- tection provided by it may be impaired. - Page 4 ® Safety and regulatory information R&S RT-ZP05S Declaration of Conformity The manufacturer declares the conformity of this product with the actual required safety standards in accordance with the Low Voltage Directive IEC 61010-031 Safety requirements for electrical equipment for measurement, control and labo- ratory use.
- Page 5 ® Safety and regulatory information R&S RT-ZP05S EC Directives ● WEEE Directive 2002/96/EC - Waste Electrical and Electronic Equipment ● RoHS Directive 2002/95/EC - Restriction of the use of certain Hazardous Sub- stances in Electrical and Electronic Equipment Meaning of safety labels Safety labels on the product warn against potential hazards.
-
Page 6: Specifications
® Specifications R&S RT-ZP05S Specifications Table 2-1: Electrical specifications Attenuation ratio 10 : 1 Bandwidth 500 MHz (meas.), –3 dB Rise time 0.7 ns (meas.) Input impedance 10 MΩ II 10 pF (meas.) Input voltage max. 300 V (450 V transient overvoltage) -
Page 7: Included In Delivery
® Specifications R&S RT-ZP05S Included in delivery Figure 2-2: Parts included in delivery 1 = Probe 2 = Ground clip 3 = Protection cap 4 = Ground lead 5 = Retractable hook 6 = Adjustment tool 7 = BNC adapter... - Page 8 ® Adjustment R&S RT-ZP05S Adjustment The probe can be adjusted for low (LF) and high frequency compensation (HF). Figure 3-1: LF compensation trimmer LF adjustment 1. Connect the probe to a 1 kHz square wave signal. 2. Adjust LF compensation trimmer T1 for optimum square wave response.
-
Page 9: Maintenance
® Maintenance R&S RT-ZP05S Cleaning Maintenance Cleaning 1. Clean the outside of the product using a soft cloth moistened with either distil- led water or isopropyl alcohol. Keep in mind that the casing is not waterproof. Note: Do not use cleaning agents. Solvents (thinners, acetone), acids and bases can damage the labeling or plastic parts.
Need help?
Do you have a question about the RT-ZP05S and is the answer not in the manual?
Questions and answers