AMC -UT M-400 Series User Manual page 31

AMC-UTx-M-xx-400 Series Digital Transmitter
LED States
• Corrupted Sensor
Module Signal
• Sensor Module
Missing
• Incorrect Sensor
Module found
• Sensor Module not
Communicating
Fault 2
• Initial state for all
LED's at boot up and
through warm-up
Fault 3
• Stuck in Bootloader
RTC
Real-Time Clock (RTC)
disabled or uninitialized
Alarms
Alarm 1 threshold
reached
Alarm 2 threshold
reached
Alarm 3 threshold
reached
Calibration
Cal Needed
In Calibration Mode /
Calibration activity
waiting to start
Calibration looking for
stable
Calibration Pass
Calibration Fail
Calibration Warning
Network Alarm Status
LED LED
Solid While
Solid Blue Solid Blue
Solid Magenta
Solid Yellow
Solid Red
Solid Red
Solid Green
Solid Green
Solid Green
Solid Green
Solid Green
Solid Green
31
Sensor Module
LED
Solid White Ready Interval indicated
Solid Blue Not indicated on Display
Solid Green Not indicated on Display
Solid Yellow Not indicated on Display
Solid Red Not indicated on Display
Solid Red Not indicated on Display
Flashing Cyan and Not indicated on Display
Yellow
(0.5 sec. cycle)
Solid Cyan Calibration Routine
Flashing Cyan (0.5 Calibration Routine
sec. cycle)
Flashing Cyan and Calibration Routine
Green
(0.5 sec. cycle)
Flashing Cyan and Calibration Routine
Red
(0.5 sec. cycle)
Flashing Cyan and Calibration Routine
Yellow
(0.5 sec. cycle)
Display Screen
Message
on Display Screen
Screen
Screen
Screen
Screen
Screen
Screen
Prompts
Prompts
Prompts
Prompts
Prompts