Vandal Guard; Figure 4-5: Vandal Guard - AMC -UT M-400 Series User Manual

AMC-UTx-M-xx-400 Series Digital Transmitter

4.2.2 Vandal Guard

Note that the Vandal Guard assembly is only compatible with wall mounting configurations. To
install the Vandal Guard follow these steps.
Mount the Transmitter to the wall. (Mounting Screws not included). Connect all wiring to the
Transmitter.
Mount the Vandal Guard to the wall. (Mounting Screws not included). Note mounting hole are
0.25 inch (6.3 mm) diameter and are on an 8.0 inch wide by 4.38 inch tall pattern.

Figure 4-5: Vandal Guard

22