Table of Contents
Advertisement
Quick Links
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR
RF-9122 GSM900-GSM1800
FREQUENCY-SHIFTING REPEATER
This is an unpublished work the copyright in which vests in Comba International ("Comba"). All rights reserved.
The information contained herein is confidential and the property of Comba and is supplied without liability for errors or omissions. No part
may be reproduced, disclosed or used except as authorised by contract or other written permission. The copyright and the foregoing
restriction on reproduction and use extend to all media in which the information may be embodied.
RF-9122T18 QE
ENU Status : 1-0-0
EQUIPMENT MANUAL
Copyright - refer to title page
The information contained herein is the
responsibility of and is approved by the
following, to whom all enquiries should be
directed in the first instance:
International Documentation Centre
Comba Telecom
Page 1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Comba Telecom RF-9122
Summary of Contents for Comba Telecom RF-9122
- Page 1 EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR RF-9122 GSM900-GSM1800 FREQUENCY-SHIFTING REPEATER EQUIPMENT MANUAL The information contained herein is the responsibility of and is approved by the following, to whom all enquiries should be directed in the first instance: International Documentation Centre Comba Telecom This is an unpublished work the copyright in which vests in Comba International ("Comba").
-
Page 2: Table Of Contents
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 0.2 CONTENTS Section Page CONTENTS ...........................2 INDEX TO FIGURES AND TABLES ..................4 HISTORY..........................5 ISSUE CONTROL .........................6 REFERENCES ........................7 GLOSSARY OF TERMS .......................8 SAFETY NOTICES AND ADMONISHMENTS..............9 SERVICING POLICY AND RETURN OF EQUIPMENT .............10 0.10 READERS COMMENTS .....................11... - Page 3 EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR OPERATION........................46 MAINTENANCE........................47 REFERENCE FREQUENCY CALIBRATION..............47 APPENDICES........................48 APPENDIX A: TOOLS FOR INSTALLATION AND MAINTENANCE .........48 APPENDIX B: REPEATER’S INTERFERENCE TO BTS ...........49 APPENDIX C: OMT INSTALLATION ..................50 APPENDIX D: RMA (RETURN MATERIAL AUTHORIZATION) FORM ......52...
-
Page 4: Index To Figures And Tables
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 0.3 INDEX TO FIGURES AND TABLES Fig 1: Front, side and bottom view of Direct Coupling Master Unit, Wireless Coupling Master Unit and Remote Units (IC/EC) enclosure..................14 Fig 2: System diagram ........................15 Fig 3: Direct Coupling Master Unit internal layout ................16 Fig 4: Remote Unit (IC/EC) internal layout..................17... -
Page 5: History
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 0.4 HISTORY Change No. Details Of Change 1-0-0 Created on 15 July 2005 1-0-0 Doc. revised with the product name changed for CE Certification on 17 August, 2005 RF-9122T18 QE Copyright - refer to title page... -
Page 6: Issue Control
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 0.5 ISSUE CONTROL Date July Section RF-9122T18 QE Copyright - refer to title page Page 6 ENU Status : 1-0-0... -
Page 7: References
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 0.6 REFERENCES 0.6.1 S-9180J datasheet Issue GSM–DCS Frequency Shifting Repeater, released 13-May-2005 Product Manager: Steven Zhou S-9180J Chinese user manual, V1.1 S-9180J Point-to-Multipoint Frequency- 0.6.2 Released in 2004-11 Shifting Repeater RF-9122T18 QE Copyright - refer to title page... -
Page 8: Glossary Of Terms
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 0.7 GLOSSARY OF TERMS Automatic Level Control Attenuation Base Station Base Transceiver Station CDMA Code Division Multiple Access Decibel Decibels relative to 1 milliwatt Downlink Duplexer Donor Terminal EEPROM Electrically Erasable Programmable Read Only Memory... -
Page 9: Safety Notices And Admonishments
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 0.8 SAFETY NOTICES AND ADMONISHMENTS This document contains safety notices in accordance with appropriate standards. In the interests of conformity with the territory standards for the country concerned, the equivalent territorial admonishments are also shown. -
Page 10: Servicing Policy And Return Of Equipment
Tel: + 65 6345 4908 Fax: + 65 6345 1186 Email: combasg@comba-telecom.com Sweden Office Address: Comba Telecom Systems AB, Gustavslundsvagen 147, S- 167 51 Bromma, Stockholm, Sweden Tel: +46 8 25 38 70 Fax: +46 8 25 38 69 Email: info@comba-telecom.se China R&D and Manufacturing Base... -
Page 11: Readers Comments
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 0.10 READERS COMMENTS Whilst every endeavour is made to ensure the accuracy of this and all Comba documents, there is always the possibility that an inaccuracy or omission could occur. In order that any amendment/remedial action can be carried out promptly, we would appreciate your co–operation in filling out and returning a photocopy of this customer reply sheet as soon as... -
Page 12: General Information
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 1 GENERAL INFORMATION The RF-9122 family of repeater system implements point-to-multipoint architecture through using a frequency-shifting technique. Each consists of master unit and remote unit. Their use is to overcome the antenna isolation problem in conventional repeater system. -
Page 13: Equipment Description
2 EQUIPMENT DESCRIPTION 2.1 GENERAL The RF-9122 GSM900-GSM1800 Frequency Shifting Repeater consists of Direct Coupling Master Unit, wireless coupling master unit and remote units (IC/EC). Each is implemented around the common RF-9122 GSM900-GSM1800 Frequency Shifting Repeater that comprises of the following: Uplink/Downlink Frequency Selective Module selects the required channel frequency and translates it to corresponding frequency. -
Page 14: Fig 1: Front, Side And Bottom View Of Direct Coupling Master Unit, Wireless Coupling Master Unit And Remote Units (Ic/Ec) Enclosure
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR Fig 1: Front, side and bottom view of Direct Coupling Master Unit, Wireless Coupling Master Unit and Remote Units (IC/EC) enclosure RF-9122T18 QE Copyright - refer to title page Page 14 ENU Status : 1-0-0... -
Page 15: System Diagram
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 2.2 SYSTEM DIAGRAM Fig 2: System diagram Frequency shifting system consists of frequency-shifting master-unit and frequency-shifting remote- unit. The master-unit receives GSM900 donor signal via direct coupling or wireless coupling, and translates it to a GSM1800 link frequency for transmission to the remote-unit(IC/EC). -
Page 16: Equipment Layout
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 2.3 EQUIPMENT LAYOUT Fig 3: Direct Coupling Master Unit internal layout Note: for Wireless Coupling Master Unit, the ATT Module is replaced by a LNA RF-9122T18 QE Copyright - refer to title page Page 16... -
Page 17: Fig 4: Remote Unit (Ic/Ec) Internal Layout
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR Fig 4: Remote Unit (IC/EC) internal layout RF-9122T18 QE Copyright - refer to title page Page 17 ENU Status : 1-0-0... -
Page 18: Manufacturing Entities
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 2.4 MANUFACTURING ENTITIES This equipment is equipped of the following standard modules identified as below RF-9122T18 QE Copyright - refer to title page Page 18 ENU Status : 1-0-0... -
Page 19: Kit Of Parts
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 2.5 KIT OF PARTS For each equipment, the following are shipped: Item Description Product Identifier Quantity Note Mounting Bracket R-9122C8-5140/1 Masonry Bolt M10×110 U Bolt M10×85×110 Allen Key 5.5mm RS-232 Cable R-9122C/R-3122AC Marked “9122”... -
Page 20: Technical Specifications
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 2.6 TECHNICAL SPECIFICATIONS 2.6.1 RF SPECIFICATONS Working Frequency, Uplink – [MHz] - P-GSM900 890 – 915 - E-GSM900 880 - 915 Working Frequency, Downlink – [MHz] - P-GSM900 935 – 960 - E-GSM900 925 - 960 Link Frequency, Uplink –... -
Page 21: Power, Mechanical And Environmental Specifications
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 2.6.2 POWER, MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS 2.6.2 POWER, Power Supply Options - Direct Coupling Master Unit 155-285VAC /45-55Hz or –48VDC ± 20% or +24VDC ± 10% 155-285VAC /45-55Hz - Wireless Coupling Master Unit - Remote Unit 155-285VAC /45-55Hz Power Consumption –... -
Page 22: Operation & Maintenance
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 2.6.3 OPERATION & MAINTENANCE Local Control and Monitoring PC via RS-232 Remote Control and Monitoring via integrated GSM modem in Data Link or SMS modes Local and Remote Controlled Working Channel No, Translation Channel... -
Page 23: Installation
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 3 INSTALLATION 3.1 WARNINGS AND ALERTS Radio Frequency energies There may be situations, particularly workplace environments near high- powered RF sources, where recommended limits for safe exposure of human beings to RF energy could be exceeded. In such cases, restrictive measures or actions may be necessary to ensure the safe use of RF energy. -
Page 24: Site Planning Considerations
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 3.2 SITE PLANNING CONSIDERATIONS Site considerations The repeater is designed to be waterproof, rainproof, and with snow protection. Temporary protection should be taken when the equipment chassis is opened for installation or maintenance in an outdoor environment. -
Page 25: Repeater Installation Checklist
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 3.2.1 REPEATER INSTALLATION CHECKLIST Installation Location Requirement Considerations Working Space available Ample space on mounting pole or wall surface (recommended to reserve 800mm x 800mm x 800mm) for unstructed airflow and cable routing. AC power supply at each installation Power cord length is 2m (6.5 ft), use a dedicated... -
Page 26: Installation Procedures
Without documentary evidence, a claim cannot be processed. Open and check each package against the packing list. For any shortage, contact Comba Telecom Systems. Do not remove items from packing materials until installation. -
Page 27: Wall Mounting Option
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 3.3.4 WALL MOUNTING OPTION Install the mounting rack to a wall with four masonry bolts (M10×110). If the mounting surface is not strong enough, insert two more masonry bolts to the upper mounting rack. -
Page 28: Fig 6: Wall Mounting Overview
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR Fig 6: Wall mounting overview RF-9122T18 QE Copyright - refer to title page Page 28 ENU Status : 1-0-0... -
Page 29: Pole Mounting Details
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 3.3.5 POLE MOUNTING DETAILS The equipment can be mounted on customer-located poles of about 75mm in diameter. Insert and tighten the U bolts to secure the mounting frame onto the pole. The remainder of the installation is identical to wall-mounting. - Page 30 EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR Optional: +24V battery connectivity External batteries provides DC voltage at 10A to the equipment. Comba recommends sealed lead- acid batteries to be used. DC connection is made with wires constructed on-site, wires of AVR 2.0mm...
-
Page 31: Commissioning
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 4 COMMISSIONING 4.1 MCU LED INDICATORS Four diagnostic LED are located on the distribution board, each indicates the status of a particular function: Identifier Colour Indication Online programming.This will flash when users read, set or download files via OMT. -
Page 32: Omt
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 4.3 OMT The equipment can be monitored and controlled by one or two means. OMT software running on a local PC with serial connection to the equipment OMC software with remote connection to the equipment over wire/wireless telecommunication network. -
Page 33: Non-Volatile Memory
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 4.4 NON-VOLATILE MEMORY A non-volatile storage device on the MCU holds the configuration of the equipment, the following information are preserved in the event of power-loss: Repeater configuration Repeater number Device number SMS center number... -
Page 34: Omt Software Version
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 4.5.1 OMT SOFTWARE VERSION The version number of OMT for this equipment is V1.04. 4.5.2 OMT SOFTWARE INSTALLATION Refer to the appendix for installing OMT software. After installing OMT software on the PC, connection to the equipment can be done directly or remotely. -
Page 35: Connecting Omt To Equipment
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 4.5.4 CONNECTING OMT TO EQUIPMENT OMT communicates to the equipment by either a direct serial link or remotely by a wireless modem. Connect the local PC to the equipment by the RS-232 cable supplied; one end connects to the ‘RS-232 interface’... - Page 36 EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR OMT will automatically distinguish between the master-unit or remote-unit display on the configuration window. (The figure below shows remote unit is as sample.) For remote connection, selecting ‘online’ should bring up the main-window shown above.
-
Page 37: Local Commissioning
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 4.6 LOCAL COMMISSIONING With OMT executing on the local PC and connected to the equipment, select ‘online’ from the main window to enter the screen for equipment configuration and data inquiry. The ‘GSM900-GSM1800 Frequency Shifting Repeater’ window will appear, and ‘Online OK!’... -
Page 38: Description Of Parameters
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 4.6.1 DESCRIPTION OF PARAMETERS The parameters being described are applicable for this system. 4.6.1.1 NETWORK PARAMETERS The following parameters are located on the left of the main screen, these include: Site ID, SMS and data link parameters, all enables communication with the OMC located in a Network Operation Centre. - Page 39 EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 4.6.1.2 RF PARAMETERS Occupying the middle of the main window are the RF parameters: Identifier Application Setting 1 Setting 2 Initial setting Soft PA Soft PA switch is to turn on/off ‘On' = DC power ‘Off’...
- Page 40 EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR Identifier Application Setting 1 Setting 2 Initial setting ATT setting Adjustment to the operation Master uplink / Assistant uplink / 0dB for master ATT, gain for: Master uplink ATT, downlink ATT is downlink ATT is...
- Page 41 EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 4.6.1.4 ALARM LIST The Alarm list for this system is shown below; these are enabled/disabled with OMT/OMC by placing a ‘tick’ in the adjacent box against the required alarm condition and select ‘Set’: Table 10: Management - Alarm list On the OMT/OMC screen, the alarm is colour coded to indicate its status: Red indicates failure, and an alarm condition is generated.
- Page 42 EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 4.6.1.5 ALARM ACKNOWLEDGEMENT As and when the designated Alarm occurs, it will be visible on OMT and/or reported to OMC. If OMC does not acknowledge after a time-out of three minutes, the same alarm will be reported to OMC.
-
Page 43: Commissioning Procedures
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 4.7 COMMISSIONING PROCEDURES System commission can commence to the master-unit and remote-unit after the monitoring system has been initialized. (e.g. when MCU LED H2 begin to flash). 4.7.1 MASTER-UNIT COMMISSIONING Commissioning Tasks Observation On-line & inquiry status Enter into the Main window. -
Page 44: Remote-Unit Commissioning
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 4.7.2 REMOTE-UNIT COMMISSIONING Commissioning Tasks Observation On-line & inquiry status Enter into the Main window. Click ‘online’ button to access the repeater’s status. Go to next step if there is no alarm. Else check the point of failure and proceed to clear the alarm. -
Page 45: Remote Monitoring Using Omc
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 4.8 REMOTE MONITORING USING OMC OMC offers flexibility to manage a network of equipment; all the tasks carried out by the OMT can be performed centrally from the OMC terminal. For OMC, in order to communicate to each equipment, unique equipment identification must be referred to, and it is entered using OMT after local commission has been completed. -
Page 46: Operation
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 5 OPERATION Following installation and commissioning, occasional operation tasks to handling alarms may be required: Alarm condition Diagnosis Power down / power Check AC power cable and verify AC mains supply is normal. During fault alarm power fault alarm, DC power supply has no output. -
Page 47: Maintenance
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 6 MAINTENANCE This equipment is designed for trouble free operation and generally does not need maintenance. Maintenance activities should only be carried out by trained personnel. The equipment operation status can be observed remotely through OMC. -
Page 48: Appendices
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 7 APPENDICES 7.1 APPENDIX A: TOOLS FOR INSTALLATION AND MAINTENANCE Hereinafter is the list of recommended tools for new installation and routine maintenance: Description Slotted screwdriver Philips screwdriver Ring spanner (M10) Electric operated drill and masonry drill bits ∅12mm... -
Page 49: Appendix B: Repeater's Interference To Bts
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 7.2 APPENDIX B: REPEATER’S INTERFERENCE TO BTS The interference to BTS from master-unit must be minimized for the required coverage; uplink noise output of the master-unit will give rise to the noise level at the BTS port. -
Page 50: Appendix C: Omt Installation
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 7.3 APPENDIX C: OMT INSTALLATION Operation and Maintenance Terminal (OMT) is windows-based software designed for the control and maintenance of Comba repeaters. Installed in a PC, it performs the operation on the repeater either by local connection via RS-232 cable or remote connection via line/ wireless modem. - Page 51 EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR OMT installation a) Copy installation programs. Create a new folder on the hard disk and name it (for instance ‘OMT V1.04). Then copy all the files on installation disk to the newly created. b) Double click the ‘SETUP.EXE” logo, then the program will start the set up and the following window will appear;...
-
Page 52: Appendix D: Rma (Return Material Authorization) Form
EQUIPMENT MANUAL FOR RF-9122 GSM900-GSM1800 FSR 7.4 APPENDIX D: RMA (RETURN MATERIAL AUTHORIZATION) FORM End of section End of Document RF-9122T18 QE Copyright - refer to title page Page 52 ENU Status : 1-0-0...
Need help?
Do you have a question about the RF-9122 and is the answer not in the manual?
Questions and answers