B03 - Setting Tracking Time Interval; B10 - Setting Sms Password - FIFOTRACK Q2 Command List

FIFOTRACK Q2 COMMAND LIST
Description B02,<link_type>
01 link_type: Link protocol, value "TCP" or "UDP".
02 default "TCP" protocol.
Reply B02,<err_code>
01 err_code: procession error code.
Example B02,TCP
01 Set link protocol to TCP.
Retrieve C04,B02
B03 – Setting Tracking Time Interval
Source GPRS/COM/SMS
Description B03,<moving_tmr>,<stop_tmr>
01 moving_tmr: time interval when moving, unit s, default 30s. When moving_tmr==0,
tracking disabled for moving status.
02 stop_tmr: time interval when stop, unit s, default 30s. When stop_tmr==0, tracking
disabled for stop status
03 When stop_tmr field empty, it is set to the same value as moving_tmr
Reply B03,<err_code>
01 err_code: procession error code.
Example B03,60
01 Set both moving_tmr and stop_tmr to 60s, tracker uploads position data every 60s.
B03,60,0
01 Set moving_tmr to 60s, and stop_tmr to 0, tracker uploads data every 60s when
moving, and stops uploading for stop status.
Retrieve C04,B03
B10 – Setting SMS Password
Source GPRS/COM/SMS
Description B10,<sms_pwd>
01 sms_pwd: SMS password, 6 digits, default "000000".
Reply B10,<err_code>
01 err_code: procession error code.
Copyright @fifotrack 2015 All Rights Reserved
OK – Succeed.
UNSUPPORT – Command not supported.
FAILED – Procession failed.
OK – Succeed.
UNSUPPORT – Command not supported.
FAILED – Procession failed.
OK – Succeed.