6.8
firebrick and baffle installation
OPERATION OF THE APPLIANCE WITHOUT THE BAFFLES CAN RESULT IN EXCESSIVE
TEMPERATURES THAT COULD DAMAGE THE APPLIANCE, CHIMNEY AND THE
The by-pass damper should be in the "OPEN" position when using the spark screen, during start-up, when load-
ing fuel and in warmer months where less heat is preferred.
The by-pass damper should be in the "CLOSED" position when the doors are closed and proper chimney draw is
established.
Place the by-pass damper
on the supports at the rear
and sides of the firebox.
BY-PASS IN "OPEN" POSITION
SURROUNDING ENCLOSURE.
Place the side and rear firebricks against the wall.
For easy start up open the by-pass damper.
SIDE VIEW
SIDE VIEW
BY-PASS IN "CLOSED" POSITION
27
EN
W415-1501 / C / 10.11.17