Firebrick Installation And Damper Operation; Firebrick Installation - Napoleon NZ7000 Installation And Operating Instructions Manual

6.6

FIREBRICK INSTALLATION AND DAMPER OPERATION

OPERATION OF THE APPLIANCE WITHOUT THE FIREBRICKS CAN RESULT IN EXCESSIVE
TEMPERATURES THAT COULD DAMAGE THE APPLIANCE, CHIMNEY AND THE

6.6.1 FIREBRICK INSTALLATION

NOTE: Ensure fibre panels set in behind brick are in good condition before installing firebrick. If fibre
panels need to be replaced, hold panels in position or secure with masking tape until fire brick is
installed.
Proper Installation of Side Panels:
Side panels will have two distinct angles on either side of each panel. The shallow angle should face the
outside of the appliance. The steeper angle should face the inside of the appliance and match the adjacent
panel.
Tilt and install the right rear
A.
firebrick against the wall.
D.
Tilt the top right firebrick
and secure under the
retaining bracket.
SURROUNDING ENCLOSURE.
B.
Install the middle and left
rear firebricks.
E.
Install the remaining top firebricks,
securing under the retaining
brackets. Install the andirons into
the bottom firebricks.
C.
Install the bottom
firebricks to aid securing
the rear firebricks against
the wall.
W415-1676 / B / 10.26.17
31
EN