Finishing; Faceplate; Upper Grill Installation - Napoleon HIGH COUNTRY NZ6000-1 Installation And Operating Instructions Manual

24

6.0 finishing

EN
USE ONLY A NON-COMBUSTIBLE MATERIAL TO FINISH THE FACE OF THE APPLIANCE.
A NON-COMBUSTIBLE MATERIAL SUCH AS CEMENT BOARD IS REQUIRED FOR THIS PURPOSE.
VENTILATION OPENINGS ARE REQUIRED IN ENCLOSURES UP TO 96" (2438mm) HIGH. THEY ARE
ABOVE 84" (2134mm) COMBUSTIBLE FINISHING MATERIALS MAY BE USED ON THE FRONT FACE.
6.1

faceplate

Remove the facing template held in place with
A.
the 12 screws shown. Discard the screws
and template.
6.2

upper grill installation

Mount the keystone and upper grill to
A.
the faceplate as shown, using the 4 nuts
supplied.
Remove the backing and place logo onto the
B.
bottom left corner of the faceplate.
Remember to record your serial # in the
C.
manual for future quick reference.
W415-1501 / C / 10.11.17
RECOMMENDED FOR ALL ENCLOSURES.
DO NOT INSULATE AROUND THE APPLIANCE.
Logo
Placement