Related Manuals for SMART WSE-400
Summary of Contents for SMART WSE-400
- Page 1 SMART electric height- adjustable wall stand User guide WSE-400 Was this document helpful? smarttech.com/docfeedback/171371...
- Page 2 © 2019–2022 SMART Technologies ULC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language in any form by any means without the prior written consent of SMART Technologies ULC. Information in this manual is subject to change without notice and does not represent a commitment on the part of SMART.
-
Page 3: Important Information
The installer must follow the installation instructions. Not doing so can result in injury or damage to equipment. Use only SMART-supplied mounting hardware or hardware that is designed to properly support the weight of the stand and mounted display and accessories. ... - Page 4 Do not use the stand if the power cord is damaged. Replace a damaged power cord only with a new cord and power bar provided by SMART Technologies or a qualified service technician. Do not modify or make changes to the control unit or hand switches.
- Page 5 Important information Use only original accessories and replacement parts. Using other accessories or parts will void the warranty/guarantee. Make sure the stand’s power cord is easily accessible at all times. Caution Operate the stand only indoors. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the stand.
-
Page 6: Table Of Contents
Contents Important information Chapter 1 About the stand Features Components Accessories More information Chapter 2 Using the stand Raising and lowering the stand Chapter 3 Troubleshooting the stand Resolving general issues smarttech.com/kb/171371... -
Page 7: Chapter 1 About The Stand
Features Components Control panel Accessories More information Features Your SMART electric height-adjustable wall stand has the following features: Feature Description Powered height With its 39 3/8" (99 cm) of electric-powered height adjustment, you can adjustment easily adjust the height of a mounted display with the press of a button. -
Page 8: Components
Chapter 1 About the stand Components The stand consists of the following components: Description Power bar Control panel Mounting holes Control panel You can raise and lower the stand with the control panel. It’s located on the right side of the stand, but you can remove and attached it to a mounted display. -
Page 9: Accessories
Use only the included six outlet power bar (model TPL615B) with the stand. More information See the following resources for more information: WSE-400 specifications: smarttech.com/kb/171387 WSE-400 illustrated installation instructions: smarttech.com/kb/171363 These documents are available in the Support section of the SMART website: smarttech.com/support. smarttech.com/kb/171371... -
Page 10: Chapter 2 Using The Stand
Chapter 2 Using the stand Raising and lowering the stand Calibrating the stand Resetting the stand Raising and lowering the stand Raising and lowering the stand Warning Ensure the locking bolts are securely tightened before operating the stand. Do not allow children or people who are not able to safely operate the stand to use it. - Page 11 Chapter 2 Using the stand Resetting the stand If the stand lowers but does not move when you try raising it or if you replace the controller, perform a factory reset by following the steps below. To factory reset the stand ...
-
Page 12: Chapter 3 Troubleshooting The Stand
Unplug the power cable for the stand. Wait 15 minutes and then reset the stand. The display doesn’t fit Ensure you’re using the mounting plate supplied with the SMART on the stand. display. If you’re using the stand with a third-party display, ensure the stand supports the display’s dimensions and mounting patterns (see... - Page 13 SMART Technologies smarttech.com/support smarttech.com/contactsupport smarttech.com/kb/171371...
Need help?
Do you have a question about the WSE-400 and is the answer not in the manual?
Questions and answers