Contents Warnings, cautions and important information Warnings Cautions Important information Chapter 1: About your SMART electric height-adjustable wall stand Features Components Accessories Chapter 2: Using your SMART electric height-adjustable wall stand Raising and lowering the stand Chapter 3: Troubleshooting your SMART electric height-adjustable wall stand...
Use only SMART-supplied mounting hardware or hardware that is designed to properly support the weight of your product. Use the SMART product only for lifting a display that meets the size and weight limitations indicated in the product specifications. Do not use the SMART product to lift people or objects.
Page 6
Do not climb (or allow children to climb) on a wall- or stand-supported SMART product. Climbing on the SMART product could result in injury or product damage. Do not stand (or allow children to stand) on a chair to touch the surface of your SMART product. Rather, mount the product at the appropriate height.
WARNINGS, CAUTIONS AND IMPORTANT INFORMATION Unplug the power cord if the SMART product malfunctions. To reduce the risk of fire or electric shock, do not expose the SMART product to rain or moisture. Do not use the product if the power cord is damaged. Replace a damaged power cord only with a new cord and power bar provided by SMART Technologies or a qualified service technician.
Important information IMPORTANT Keep these instructions. Make sure an electrical socket is near the SMART product and remains easily accessible during use. Plug the SMART product into its own electrical outlet for best operation. This product includes an article or articles that contain lead, cadmium and Bisphenol A.
Features Components Control panel Accessories More information Features Your SMART electric height-adjustable wall stand has the following features: Feature Description Powered height With its 39 3/8" (99 cm) of electric-powered height adjustment, you can adjustment easily adjust the height of a mounted display with the press of a button.
CHAPTER 1 ABOUT YOUR SMART ELECTRIC HEIGHT-ADJUSTABLE WALL STAND Components The stand consists of the following components: Description Power bar Control panel Mounting holes Storage cabinet (rear surface) Control panel You can raise and lower the stand with the control panel. It’s located on the right side of the stand, but you can remove and attached it to a mounted display.
The laptop shelf is a convenient place to place your laptop when you’re using a stand-mounted interactive display. More information See the following resources for more information: WSE-400 specifications: smarttech.com/kb/171387 WSE-400 installation guide: smarttech.com/kb/171363 These documents are available in the Support section of the SMART website: smarttech.com/support. smarttech.com/kb/171371...
To prevent injury, keep hands and people away from crush and pinch locations on the stand. Operating the SMART product can create a hand-crushing or hand-pinching hazard. To prevent injury, keep hands and people away from crush and pinch locations on the product.
Page 14
CHAPTER 2 USING YOUR SMART ELECTRIC HEIGHT-ADJUSTABLE WALL STAND Resetting the stand The stand needs to be reset before you start using it. To reset the stand 1. Connect the stand to a power outlet. 2. Press the Down button and lower the stand to the lowest position.
CHAPTER 3 TROUBLESHOOTING YOUR SMART ELECTRIC HEIGHT-ADJUSTABLE WALL STAND Troubleshooting your SMART electric height-adjustable wall stand This section describes how to troubleshoot your wall stand. To resolving general issues Issue Possible solution The stand does not Check all cables and ensure that they are not damaged.