Table of Contents
Advertisement
Mounting instructions
Rack mounting requires the included MBD 149 1U, through-desk and rack
mounting kit (part #70-077-03).
Rack mount an SW8/12 VGA Ars unit as follows:
1.
If present, remove the four rubber feet from the bottom of the unit.
2.
Use four supplied 8-32 x 5/16" long screws to secure a mounting bracket to
each side of the unit (figure 2-1).
3.
Use four supplied 10-32 x 3/4" long screws to secure the bracket to the rail.
Bracket
Screws
Figure 2-1 — Rack mounting the switcher
Mounting
Screws
SW8/12 VGA Ars • Installation and Operation
Mounting
Screws
Rack Mount
Bracket
2-3
Advertisement
Table of Contents
Need help?
Do you have a question about the SW12 VGA Ars and is the answer not in the manual?
Questions and answers