Table of Contents
Advertisement
Figure 5-6 — Sample program window (complete)
4.
•
To create a tie, drag an input box to one or more output boxes. To remove
a tie, drag the output box to its tied input box or to the trash can.
•
To make the control program easier to use, assign a device icon to each
input and output. Click on a box that represents an input or output, and
drag the desired icon onto the box from the icon palette that appears.
•
For quick display of information on a specific input or output device,
position the pointer tool over that device in the control program window.
The program opens a window that details the connections to that device
and the status of the optical link (present or missing) input from or
output to that device. See the inset box in figure 5-6.
You can print a map of the current configuration by clicking File > Print Tie
H
Map.
Fiber Matrix 6400 Switcher • Matrix Software
5-7
Advertisement
Table of Contents
