Pin Allocation Of Supply Cable Sk-Idm-Z2-J2-5M-S-N Rs-232 Interface - Pepperl+Fuchs IDM-Z2-161-M-1D-J2-BT-N-N0 Manual

IDM-Z2-161-M-1D-J2-BT-N-N0, IDM-Z2-161-M-1D-J2-BT-P-N0, IDM-Z2-261-M-2D-J2-BT-
N-N0
5.2 Pin allocation of supply cable SK-IDM-Z2-J2-5M-S-N RS-232 inter-
face
Supply of the base station zone 2/22 according to system configuration 1,2 and 4 via plug-in
connection plug/coupler.
Figure 5.12
Note
The serial connection cables come with a yellow marking.
Warning!
Do not open the housing!
Before the unit is put into operation in a potentially explosive atmosphere, it must be ensured
that the housing is closed and not damaged.
Note
Changes to the pin assignment may only be carried out by trained and qualified personnel.
Connection of the base station zone 2/22 to the supply cable RS-232 via plug-in con-
nection plug/coupler
Basic connection cable RS-232
Pin assignment connector
Pin
2
3
1
26
Supply Cable
Connection coupling
Designation Pin
GND (brown) 2
TxD (white) 3
+UB (yellow) 1
Designation
GND (brown)
RS-232 - TxD (white)
Supply (yellow)