Lenovo ThinkSystem ST50 V2 Setup Manual page 97

S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
About this task
Attention:
• Read "Safety inspection checklist" on page 43 and "Installation Guidelines" on page 41 to ensure that you
work safely.
• Ensure that all adapters and other components are installed and seated correctly, and that you have not
left loose tools or parts inside the server.
• Ensure that all internal cables are correctly routed, see "Internal cable routing" on page 19 for more
information.
• If you are installing a new server cover, attach the service label to the inside of the new server cover if
necessary.
Note: A new server cover comes without a service label attached. If you need a service label, order it
together with the new server cover. The service label is free of charge.
Watch the procedure
A video of this procedure is available at YouTube:
AU3iY3F7lq3qfqr5caGbIu
Procedure
Step 1. (Optional) Install the cage bar.
a. Insert the tabs on cage bar to the slots on the rear side of the chassis.
b. Align the tabs on the other end of the cage bar to the slots on the front side of the chassis, and
rotate the cage bar toward the front of the chassis until the cage bar is secured in place.
.
https://www.youtube.com/playlist?list=PLYV5R7hVcs-
Chapter 3
.
Server hardware setup
93