DeWalt DW099E User Manual page 22

E
• An exposure to the beam of a Class 2 laser is considered safe for a maximum of
0.25 seconds. Eyelid refl exes will normally provide adequate protection.
Residual Risks
The following risks are inherent to the use of this device:
– injuries caused by staring into laser beam.
LABELING
• Do not remove or deface warning labels. If labels are removed, user or others
may inadvertently expose themselves to radiation.
• The label on your tool may include the following symbols.
V ............................ volts
mW ......................... milliwatts
........................ laser warning symbol
nm .......................... wavelength in nanometers
The following pictographs are shown on the tool:
Read the instruction manual before use
Laser warning
Do not stare into the laser beam.
22
E N G L I S H
5