Table of Contents
Advertisement
Quick Links
Questions? See us 0n the World Wide Web at
Perguntas? Visite-nos na World Wide Web em
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
MANUAL DE INSTRUÇÕES
DW08301
Self-Leveling 3 Beam Laser Pointer
Pointeur laser autonivelant 3 faisceaux
Puntero láser de 3 rayos de autonivelación
Apontador-Laser 3 Autonivelante
www.dewalt.com
www.dewalt.com
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
Advertisement
Table of Contents
Related Manuals for DeWalt DW08301
Summary of Contents for DeWalt DW08301
- Page 1 INSTRUCTION MANUAL ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. GUIDE D’UTILISATION MANUAL DE INSTRUCCIONES MANUAL DE INSTRUÇÕES DW08301 Self-Leveling 3 Beam Laser Pointer Pointeur laser autonivelant 3 faisceaux Puntero láser de 3 rayos de autonivelación Apontador-Laser 3 Autonivelante...
- Page 2 ENGLISH (original instructions) FRANÇAIS (traduction de la notice d’instructions originale) ESPAÑOL (traducido de las instrucciones originales) PORTUGUÊS (traduzido das instruções originais)
- Page 3 FIG. 3 FIG. 1 FIG. 2 FIG. 4 FIG. 4 FIG. 5 FLASHING CLIGNOTANT DESTELLA (7.5 >4° Figure 7 FIG. 6 Figure 8 Figure 9 1. Power Switch 2. Laser Apertures Figure 10 3. Battery Compartment 4. Label information...
-
Page 4: Product Overview
PRODUCT OVERVIEW The DW08301 laser level is a self-leveling laser tool that can be used for horizontal (level) and vertical (plumb) alignment and square alignment. This tool comes fully assembled and has been designed with features that allow for quick and easy set-up. Please read and understand all instructions within this instruction manual in addition the Safety Manual prior to use. -
Page 5: Batteries And Power
Out of Level Indicator The DW08301 is equipped with an out of level indicator on the keypad as shown in Figure 2. When the tilt range (> 4° tilt) has been exceeded the laser beam will flash. The flashing beam indicates that the tool IS NOT LEVEL (OR PLUMB) AND SHOULD NOT BE USED FOR DETERMINING OR MARKING LEVEL (OR PLUMB). Try repositioning the laser on a more level surface. -
Page 6: Field Calibration Check
THE LASER BEAMS FLASH (FIG. 4) The DW08301 laser level has been designed to self-level up to 4° in all directions when positioned as shown in Figure 4. If the laser is tilted so much that internal mechanism cannot plumb itself, the laser will flash —the tilt range has been exceeded. THE FLASHING BEAMS CREATED BY THE LASER ARE NOT LEVEL OR PLUMB AND SHOULD NOT BE USED FOR DETERMINING OR MARKING LEVEL OR PLUMB. - Page 8 WALT Industrial Tool Co., 701 East Joppa Road, Towson, MD 21286 • (Apr. 14) Copyright © 2014 D WALT...