Advertisement
Quick Links
All manuals and user guides at all-guides.com
Rack Adapter Panel
GRA-410
Assembly Manual
GW INSTEK PART NO. 82RA-41000MC1
This assembly manual contains proprietary information, which is protected by copyrights. All rights are
reserved. No part of this manual may be photocopied, reproduced or translated to another language
without prior written consent of Good Will company.
The information in this manual was correct at the time of printing. However, Good Will continues to
improve products and reserves the rights to change specification, equipment, and maintenance
procedures at any time without notice.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng Dist., New Taipei City 236, Taiwan.
ISO-9001 CERTIFIED MANUFACTURER
Advertisement
Related Manuals for GW Instek GRA-410
Summary of Contents for GW Instek GRA-410
- Page 1 Rack Adapter Panel GRA-410 Assembly Manual GW INSTEK PART NO. 82RA-41000MC1 This assembly manual contains proprietary information, which is protected by copyrights. All rights are reserved. No part of this manual may be photocopied, reproduced or translated to another language without prior written consent of Good Will company.
-
Page 2: Blank Panel
The GRA-410 supports both the EIA (GRA-410-E) and JIS (GRA-410-J) standards for use with standard sized rack units. Incorporating a strong frame and robust design, the GRA-410 can fit up to 6 Type I, 3 Type II or 2 Type III PSW power supplies. - Page 3 All manuals and user guides at all-guides.com GRA-410 Assembly Manual 62RA-410HP701 BLANK PANEL 62RA-410HP601 BLANK PANEL 5320-00403001 SR-3S 62RA-410HP101 Middle Bracket 592B-W3008NS1 PMS-W-3*8 62RA-410HPAA1 EIA BRACKET 3U 593B-03008NS1 FMS-3*8 593B-03005NS1 FMS-3*5 62RA-410HP5B1 Right Bracket 62RA-410HP4A1 Left Bracket 62RA-410HP3A1 Rear Bracket...
-
Page 4: Initial Setup
All manuals and user guides at all-guides.com Assembly 62RA-410HP3A1 Rear Bracket 599B-03006NS1 IMS 3*6 62RA-410HP9A1 Rack HP 62RA-410HPD01 Rack HP 594B-W3008NS1 BMS-W-3*8 62RA-410HPC01 TOP Bracket Assembly Initial setup 1. Remove the handle (from) the power supply units. Remove the handle cover. ... - Page 5 All manuals and user guides at all-guides.com GRA-410 Assembly Manual 2. Attach the Front Bracket to the Middle Bracket with the rack screws. Front Bracket rack screw 3. Secure the Rack Holding Plates (Rack HP) to the groove on the Rear Bracket and to the instrument(s).
-
Page 6: Specification
Use the SR-3S pins to hold two adjacent brackets together. Blank panel screws Specification Load Capacity Max 20kg Rack Weight GRA-410-E:1.0kg GRA-410-E: 1.2kg Rack installation Diagram Please note the minimum width that is needed to be supported on the L-brackets.