Main Parts - Stihl SR 200 Instruction Manual

24 Main Parts

23.1 Maintenance Work
All the operations described in the "Maintenance
Chart" must be performed on a regular basis. If
these maintenance operations cannot be per‐
formed by the owner, they should be performed
by a servicing dealer.
STIHL recommends that you have servicing and
repair work carried out exclusively by an author‐
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
technical information.
If these maintenance operations are not carried
out as specified, the user assumes responsibility
for any damage that may occur. Among other
parts, this includes:
– Damage to the engine due to neglect or defi‐
cient maintenance (e.g. air and fuel filters),
incorrect carburetor adjustment or inadequate
cleaning of cooling air inlets (intake ports, cyl‐
inder fins).
– Corrosion and other consequential damage
resulting from improper storage.
– Damage to the machine resulting from the use
of poor quality replacement parts.
23.2 Parts Subject to Wear and Tear
Some parts of the power tool are subject to nor‐
mal wear and tear even during regular operation
in accordance with instructions and, depending
on the type and duration of use, have to be
replaced in good time. Among other parts, this
includes:
– Filters (air, fuel)
– Rewind starter
– Spark plug
– Damping elements of anti-vibration system
0458-457-0121-C
24 Main Parts
3
17
18
19
16
13
12
15
14
1 Container cap
2 Solution container
3 Muffler
4 Starter grip
5 Spark plug boot
6 Manual fuel pump
7 Carburetor adjusting screws
8 Choke knob
9 Air filter
10 Tank cap
11 Fuel tank
12 Deflector screen
13 Metering knob
14 Nozzle
15 Blower tube
16 Throttle trigger
17 Setting lever
18 Valve lever for solution feed
19 Throttle trigger lockout (depending on market)
20 Pleated hose
21 Back padding
22 Harness
23 Backplate
English
1
2
5
6
7
4
8
#
9
10
11
23
22
21
20
23