Minimize Wear And Avoid Damage - Stihl SR 200 Instruction Manual

English
The following intervals apply for normal operating
conditions. The specified intervals must be short‐
ened accordingly when working for longer than nor‐
mal or under difficult cutting conditions (extensive
dust, etc.).
Intake port for cooling air Visual inspection
Spark arresting screen
in muffler
All accessible screws,
nuts and bolts (not
adjusting screws)
Container with hose
Strainer in solution con‐
tainer (only with mounted
pressure pump or if ULV
metering knob is used)
Metering unit on blower
tube
Anti-vibration elements
Blower air intake shield
Throttle cable
Safety information label
1)
present only in some countries
2)
STIHL recommends STIHL dealers
23 Minimize Wear and Avoid
Damage
Observing the instructions in this manual helps
reduce the risk of unnecessary wear and dam‐
age to the power tool.
The power tool must be operated, maintained
and stored with the due care and attention
described in this owner's manual.
The user is responsible for all damage caused by
non-observance of the safety precautions, oper‐
22
Replace after every 100
hours of operation
Clean
Check if installed
1)
Check or replace
Tighten
Visual inspection (condi‐
tion, leaks)
Clean
Clean or replace
check
check
Have replaced by serv‐
2)
icing dealer
check
Clean
set
replace

23 Minimize Wear and Avoid Damage

X
X
2)
X
X
X
X X
ating and maintenance instructions in this man‐
ual. This includes in particular:
– Alterations or modifications to the product not
approved by STIHL.
– Using tools or accessories which are neither
approved or suitable for the product or are of a
poor quality.
– Using the product for purposes for which it
was not designed.
– Using the product for sports or competitive
events.
– Consequential damage caused by continuing
to use the product with defective components.
X
X
X X
X
X
X
0458-457-0121-C
X
X
X
X
X
X