EverFocus EDR1620 Instruction Manual page 29

(7) SUMMARY :
Dial Jog to change items in the SUMMERY table.
All camera's statuses are shown in the SUMMARY table. The table is for checking camera overall
statuses only, not for setting. You can check the following statues: "Title", "Install", "Covert",
"SEQ (Main/Call)", "Quality", "TP1~8 Normal Speed" and "TPN Normal Speed". The table is only
for checking camera overall statuses, not for setting.
Note: The SUMMARY table also exists in ALARM, MOTION and VLOSS SETUP MENU.
All of these SUMMARY tables are also for checking particular overall statuses, but not for setting.
(8) Copy camera's setting from a camera to other cameras
In order to copy the setting from a camera to other cameras, we provide a setting copy function.
Press MENU when you finish setting up a camera, and then press COPY. A COPIED sign will
show up on the top right corner of the screen, and it means the setting has been copied. Dial the Jog
to the camera you would like to copy, and then press SEARCH to paste. The previous setting of the
camera will be covered, and a PASTED sign will show up.
28