Weight; Capacities; Air Circuit Reservoir; Fuel Type - PREVOST Le Mirage XL Owner's Manual

TECHNICAL INFORMATION
Weights
Curb weight (before conversion)
XL-40 .................................27,115 lbs (12 202 kg)
XL-45 .................................30,200 lbs (13 590 kg)
XL-45E...............................26,860 lbs (12 184 kg)
Gross vehicle
weight rating..................48,900 lbs (22 005 kg)
Gross axle weight rating
Front suspension.................16,500 lbs (7 425 kg)
Drive axle.............................20,400 lbs (9 180 kg)
Tag axle ...............................12,000 lbs (5 400 kg)
The Gross Vehicle Weight Rating (G.V.W.R.) and
the Gross Axle Weight Ratings (G.A.W.R.) for
front, drive and rear axles are listed on a certifica-
tion plate located on the panel at the L.H. side of
driver's seat, under the side control panel.

Capacities

Engine oil
Crankcase ........................... 37 U.S. qts (35 liters)
Reserve tank ...................... 10 U.S. qts (9,5 liters)
(Standard on XL-45, Optional on XL-40 & 45E)
Fuel tank
XL-40 & XL-45E .............160 U.S. gal. (606 liters)
XL-45 ..............................208 U.S. gal. (787 liters)
Auxiliary fuel tank
(Optional) ..........................90 U.S. gal. (341 liters)
Cooling system (Approx.)
Includes heating system...... 24 U.S. gal. (91 liters)
Transmission oil
(does not include
external circuits) ................10 U.S. gal. (38 liters)
Differential oil ..43/41 U.S. pts (20,7/19,5 liters)
Power steering
reservoir .........................4.0 U.S. qts (3,8 liters)
Windshield washer
reservoir ......................... 5 U.S. gal. (18,9 liters)
Refrigerant
Driver's system (XL-40 & 45E) ..........6 lbs (2,7 kg)
Driver's system (XL-45) .....................6.5 lbs (3 kg)
Driver's and central system ..............24 lbs (11 kg)

Air Circuit Reservoir

Including suspension
and accessories ............... 6,775 in

Fuel Type

ASTM specification.................................. D-975
Recommended grade .................................. 1-D
Acceptable grade......................................... 2-D

Wheels And Tires

Steel wheels (stud mounted).................9 X 22.5
Except inner drive axle ........................ 8.25 X 22.5
Alum. polished wheels (stud mounted)9 X 22.5
Except inner drive axle (steel) ............. 8.25 X 22.5
Tires ............................................. 315/80 R 22.5
Recommended tire inflation pressure (cold)
Front wheels.............................. 100 psi (689 kPa)
Drive axle .................................... 90 psi (620 kPa)
Tag axle....................................... 80 psi (551 kPa)
Caution:
These tire pressures are established
in accordance with the maximum allowable load
on each axle.
mended if the axle load is less than the above
specifications. Weigh vehicle fully loaded and
pressurize according to tire manufacturer's rec-
ommendations. For other tire and wheel specifi-
cations, see Prévost tire pressure tabulation in
"Coach Final Record".

Belts

Radiator fan drive (transfer)
Make:............................................................. Gates
5 - 2
3
(111 042 cm
A lower pressure is recom-
3
)