Video Cassette Player; Tv Tuner - PREVOST Motorcoach XL Series Operator's Manual

FIGURE 21
Interphone
(Optional)
Use the Interphone for communications between
driver and host/hostess. Master receiver is
located in driver's area and secondary receiver is
installed on lavatory exterior front wall. To use
system, simply unhook receiver and press button
identified with an asterisk (*); buzzer will sound at
other end.

VIDEO CASSETTE PLAYER

Activate all video system components by
depressing the POWER and VIDEO buttons
located on the Audio/video control unit mounted
on R.H. console. The VCP can be operated from
the control unit and VCP front panel.
NOTE:
The video will not operate unless the
control unit is energized and the VIDEO button
depressed. After the audio/video control unit is
energized, there is a ten second delay before the
VCP and monitors power on.
8 6 9 3
2
FIGURE 22
1. Video Cassette Compartment
Microphone
Back-up PA
23121
1
4 5 11 10
7
23117
2. Power button
3. Rew (Rewind/Reverse Picture Search)
button
Push to rewind the video tape. When a tape is
playing, momentarily press to engage the reverse
search mode.
4. Play button
Push to play the video tape. When auto tracking is
working, the PLAY indicator light blinks.
5. FF (Fast forward/Forward Picture Search)
button
Push to fast-forward the video tape. Push
momentarily to engage the forward search mode.
6. Stop/Eject button
Push to stop video tape play.
7. Tracking Control Knob.
Use this control during playback to correct picture
alignment.
8. Auto Repeat Button
Push this button to turn on the auto repeat feature.
With this feature activated, the VCP automatically
rewinds the tape and returns to the play mode. If
this feature is not activated, the VCP rewinds and
ejects the tape when the end of the tape is
reached.
9. Record Button
10. Infrared Remote Sensor
Receives information from the infrared remote
control.
11. Record Speed Button

TV TUNER

1. Power Button
Turns unit on or off.
2. Power Indicator
Dim light when power present but unit turned off.
Bright light when unit is turned on.
3. Auto Programming Button
Press once to program tuner.
2 - 19
CONTROLS/INSTRUMENTS