Advertisement
1. Bolt
2. Washer
6. Remove the coupler assembly.
3
Removing the Adapter Plate
No Parts Required
Procedure
1. Remove the hex socket flat head screws from the
adapter plate
(Figure
1. Hex socket flat head
screws
2. Remove the adapter plate
Note: Discard the adapter plate and screws.
Figure 4
3. Coupler assembly
5).
Figure 5
2. Adapter plate
(Figure
5).
4
Installing the Alternator Pulley
and Belt
Parts needed for this procedure:
1
Alternator pulley
1
Alternator belt
2
Hex socket flat head screw (M8 x 20 mm)
Procedure
1. Install the alternator belt onto the alternator pulley
(Figure
6).
1. Alternator pulley
2. Install the alternator pulley to the motor with the 2
hex socket flat head screws (M8 x 20 mm) as shown
in
Figure
7.
3
Figure 6
2. Alternator belt
Advertisement
