Cisco DECT 6823 User Manual page 4

Remove the plastic over the contacts.
Step 3
Place the battery under the clip and drop it into the compart ment.
Step 4
The battery contacts are on the top left edge of the battery and the top
left edge of the battery compartment .
Ensure that the contacts meet and that the battery is seated in the
compart ment .
Note: The battery fits only one way in the compart ment . Don't force the
battery in the wrong way in the battery compartment .
Replace the battery cover, make sure that the cover is closed, and turn
the latch clockwise to the locked position.
Don't force the cover closed. If it doesn't close easily, take it off and
check that the battery is completely seated in the battery compartment .
Step 5
2