Stylus Pro XL
6.
Remove the CBB (M3 11) screw (under the CR cap cover) and plain washer securing the
monochrome and color printheads to the carriage base.
Figure 3-8. Ink Cartridge Holder Removal
7
Pull the black or color head toward you, and disconnect the head FFC cable on the head driver
board (nozzle selector). Then remove the black or color head.
Black Head
REV.-A
Rubber Cap
Head Fixing Sczew
Figure 3-9. Printhead Removal
Disassembly and Assmbly
CBB (M3x11)
Color Head
CBB (M3x11)
3-9