Epson STYLUS PRO XL 4004677 Service Manual page 107

Troubleshooting
Table 5-7. Repair of the Printer Mechanism (Cont.)
Symptom Condition
Paper is not
Paper is not fed.
fed normally.
Paper top of
form position
slips (comes
out too narrow).
Note: Cleaning sheets are available as service parts.
5-14
Cause
Foreign
substances are Visually check the paper
lodged in the path.
paper path.
Paper feeding
gears are Visually check the gears.
defective.
The paper feed Measure the coil
motor is defective. resistance of the PF motor.
Particles of power Check that particles of the
residue from power residue from the
coating on glossy coating on glossy paper
paper are sticking are not sticking to the PF
to the PF roller. roller.
Stylus Pro XL
Checkpoint
Remove any
foreign
substances.
Replace
defective
gears.
Replace the
PF motor.
Perform the
PF roller
cleaning with
the cleaning
sheet
(See Note)
Solution
Rev. -A