Technical Data; Power Table - F&F BIS-411-LED Quick Start Manual

Technical data

power supply
contact
maximum load current (AC-1)
control pulse current
activation delay
power indication
signalling activation
power consumption
standby
on
terminal
tightening torque
working temperature
dimensions
mounting
ingress protection

Power table

tungsten
2000 W
The above data are indicative and will heavily depend on the
design of a specific receiver (that is especially important for
LED bulbs, energy-saving lamps, electronic transformers and
pulse power supply units), switching frequency and operating
conditions.
For more information visit: www.fif.com.pl.
halogen fluorescent
1250 W
2.5 mm² screw terminals
1000 W
- 5 -
165÷265 V AC
separated 1×NO
16 A
(120 A/20 ms)
1 module (18 mm)
on TH-35 rail
energy-saving
500 W
5 mA
0.1÷0.2 s
green LED
red LED
0.15 W
0.6 W
0.4 Nm
-25÷50°C
IP20
LED
250 W