Technical Data; Power Table - F&F BIS-404 Quick Start Manual

Technical data

power supply
contact
maximum load current (AC-1)
control pulse current
total backlight current control buttons
activation delay
power indication
power consumption
standby
on
terminal
tightening torque
working temperature
dimensions
mounting
ingress protection

Power table

tungsten
1000 W
The above data are indicative and will heavily depend on the
design of a specific receiver (that is especially important for
LED bulbs, energy-saving lamps, electronic transformers and
pulse power supply units), switching frequency and operating
conditions.
For more information visit: www.fif.com.pl.
halogen fluorescent
600 W
2.5 mm² screw terminals
�54 (size 48×43 mm), h= 20 mm
in flush mounted box �60
500 W
- 4 -
165÷265 V AC
energy-saving
250 W
2×NO
2×8 A
1 mA
5 mA
0.1÷0.2 s
green LED
0.15 W
0.7 W
0.4 Nm
-25÷50°C
IP20
LED
120 W