Advertisement
Quick Links
ASSEMBLY & OPERATING INSTRUCTIONS
Monument Pellet Grill
WARNING:
Read this Owner's manual carefully and be sure
your pellet grill is properly assembled, installed
and maintained. Failure to follow these
instructions could result in serious injury and/or
property damage. This pellet grill is intended for
outdoor use only and is not intended to be
installed in or on recreational vehicles or boats.
Note to Installer
Leave this Owner's Manual with the customer
after delivery and/or installation.
Scan and visit:
Monumentgrills.com
Note to Consumer
Leave this Owner's Manual in a convenient
place for future reference.
Customer Service Helpline:
For parts ordering, call:
1- 800-530-9133
MFG No.: 85030(S2221503M)
UPC No.:856597007645
• Parts
• Assembly
• Safety Rules
• Use and Care
• Troubleshooting
C044459-A1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Monument Grills 85030
Summary of Contents for Monument Grills 85030
- Page 1 This pellet grill is intended for 1- 800-530-9133 outdoor use only and is not intended to be installed in or on recreational vehicles or boats. MFG No.: 85030(S2221503M) UPC No.:856597007645 Note to Installer Leave this Owner’s Manual with the customer after delivery and/or installation.
-
Page 2: Table Of Contents
Table Of Contents 1. Grill Warranty ----------------------------------------------------------------------------------------------------------2 2. Safety warning -------------------------------------------------------------------------------------------------------2-3 3. Hardware list------------------------------------------------------------------------------------------------------------4 4. Parts Diagram-----------------------------------------------------------------------------------------------------------5 5. Parts list-------------------------------------------------------------------------------------------------------------------6 6. Assembly steps------------------------------------------------------------------------------------------------------7-15 7. Use of the Pellet Grill---------------------------------------------------------------------------------------------16-20 8. Trouble Shooting ------------------------------------------------------------------------------------------------------21 Grill Warranty Three-Year Full Warranty on Grill If this grill fails due to defective material or workmanship within one year from the date of purchase, call 1-800-530-9133 to arrange for a free repair (or replacement if repair proves impossible). -
Page 3: Safety Warning
Safety Warning Disposal of ashes – Ashes should be placed in a metal container with a tight-fitting lid.The closed cotainer of ashes should be placed on a non-combustible floor or on the ground,well away from all combustible materials,pending final disposal. When the ashes are disposed by burial in soil or otherwise locally dispersed, they should be retained in the closed container until all cinders have thoroughly cooled. -
Page 4: Hardware List
Contents for Hardware Pack The following table illustrates a breakdown of the hardware pack. It highlights what components are used the various stages of assembly. Tools required for assembly Philips Head Screwdriver (not included). Note: The left and right sides of the grill are on your left and right as you face the front of the grill. Philips Head Screwdriver Make sure your grill is assembled properly. -
Page 5: Parts Diagram
Model 85030 Parts Diagram... -
Page 6: Parts List
Model 85030 Parts List Se q. Se q. Material Code Appellation Material Code Appellation D30P000238 Main Lid Hinge-Right D30Z001681 Back Leg-Left D30P000226 Main Lid D30Z001959 Front Leg-Left A0212808 LOGO D30P000228 Cart Front Board A02120146 Main Lid Handle A02121238 Axle A02120862... -
Page 7: Assembly Steps
A:8PCS A:8PCS B:4PCS C:4PCS H:8PCS... - Page 8 F:1PC...
- Page 9 B:12PCS C:12PCS D:2PCS E:2PCS A:2PCS B:2PCS...
- Page 10 D:2PCS E:2PCS A:2PCS G:2PCS...
- Page 11 A:2PCS...
- Page 13 A:8PCS B:4PCS C:4PCS K:8PCS...
- Page 14 G:2PCS...
-
Page 16: Use Of The Pellet Grill
Use Of The Pellet Grill 1: Placement of the Device The pellet grill should be placed in outdoor open and ventilate area, and keep at least the distance shown in the picture with fixed facilities around and keep far away from flammable and combustible materials. - Page 17 Use Of The Pellet Grill 4: Button Interface 5: Ignition Instruction Before each ignition, please clean up the residual ash in the burning chamber. Then add new fuel to the control box, it is better not to exceed the filter screen of the control box (about 2/3); put small amount of new fuel into the burning chamber, and it is best that the fuel covers the ignition rod 1~2 layers in a pyramid shape.
- Page 18 Use Of The Pellet Grill 6: Turn off the Device To safely turn off the grill follow the steps below : •Open the upper cover of the control box, remove the residual fuel from the box and keep it properly for next use; •Let the grill continue to work 5 to ten minutes to discharge the fuel in the feeder;...
- Page 19 Use Of The Pellet Grill 8: Button Function Description This is the power button of the device(Power indication function included). The indication is off when the device is off . The indication of blue light is on when the device is on. This button is the unit switch button.
- Page 20 Use Of The Pellet Grill Position temperature indication, show S,200,225,250,300,350,400,450,475,H. Actual temperature for PROBE 1 and PROBE 2 . Actual temperature for grill body probe. Fan Work Fan start working after machine starts. Fan will keep running for 10 min after machine shut off or temperature decrease to 130F Fire Rod Work (1) First ignition, keep pressing the power button, the ignition rod will run for 8 min after...
-
Page 21: Trouble Shooting
Trouble Shooting Failure description Failure diagnosis Trobleshooting Ignition fails There is fuel in the fire cup but it Turn the dial off and on and try to is not ignited ignite again No fuel in the fire cup because Change to smaller fuel the fuel pellet is too large to enter the feeder The feed screw stops...
Need help?
Do you have a question about the 85030 and is the answer not in the manual?
Questions and answers