Advertisement

MONUMEMTPELLET GRILL
USE AND CARE MANUAL
Model:85001
Please read this entire manual before installation and use of this pellet fuel-burning appliance.
Failure to follow these instructions could result in property damage, bodily injury or even death.
Contact local building or fire officials about restrictions and installation inspection requirements in your area.
THIS PELLET GRILL IS DESIGNED FOR OUTDOOR USE ONLY
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
WWW.MONUMENTGRILLS.COM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 85001 and is the answer not in the manual?

Questions and answers

Summary of Contents for Monument Grills 85001

  • Page 1 MONUMEMTPELLET GRILL USE AND CARE MANUAL Model:85001 Please read this entire manual before installation and use of this pellet fuel-burning appliance. Failure to follow these instructions could result in property damage, bodily injury or even death. Contact local building or fire officials about restrictions and installation inspection requirements in your area.
  • Page 2: Table Of Contents

    . It is the duty t of the purchaser to verify that a retailer is authorized. A purchase on Amazon or other marketplace internet retailer from any entity other than Monument Grills is not an original purchase and will not qualify for a warranty...
  • Page 3: Safety Warning

    READ THE ENTIRE MANUAL CAREFULLY BEFORE INSTALLING AND USING THE PELLET GRILL. Install and use it as required (outdoor use only). Monument Grills will not be responsible for any propertyloss, personal injury or even death caused by failure to follow the instructions.
  • Page 4: Certificates

    2. Certificates MONUMENT Product name Pellet Grill 5012274 Model Number S2221501M Certified to UL SUBJECT 2728 Fuel input rating 1.22Ib/H Certified to ULC/ORD-C2728 Electrical Rate 120V/60Hz/0.25 kW Refer to Intertek’s Directory of Building Products for detailed information If Fire Occurs: Call Fire Department Do Not: Try To Move Appliance, Try To Smother Fire, Or Put Water On The Fire Keep The Appliance Clean –...
  • Page 5: Explosion View

    3 Exploded View...
  • Page 6: Parts List

    4. Part list Seq. Material Seq. Material Appellation Appellation Code Code D010020530 Logo A02120957 Power Line A02120921 Auger D01002068 Main Lid A02120861 Cooking Grid A02120434 Auger motor Hanger for cooking grid A02120435 Fan motor A02121360 A02120862 Warming rack A02120986 Wheel A02120436 Igniter probe D0100234...
  • Page 7: Hardware

    5. Hardware 6. Assembly steps Make sure your grill is assembled properly. Detailed assembly instructions are packed with each grill giving specific assembly procedures for each model. Follow these instructions carefully to ensure the correct and safe assembly of the grill. Caution: Although we take every effort to ensure that the assembly process is as easy as possible, it is inherent with fabricated steel parts that corners and edged can cause cuts if improperly handled during assembly procedures.
  • Page 8 B:12PCS C:12PCS A:8PCS...
  • Page 9 E:2PCS F:2PCS A:2PCS...
  • Page 10 E:2PCS F:2PCS A:2PCS...
  • Page 12 D:2PCS...
  • Page 14: Use Of The Pellet Gril

    7. Use of the Pellet Grill 7.1 Placement of the Device The pellet grill should be placed in outdoor open and ventilate area, and keep at least the distance shown in the picture with fixed facilities around and keep far away from flammable and combustible materials.
  • Page 15 7.4 Button Interface Before each ignition, clean up the residual ash in the burning chamber. Then add new fuel to the control box, it is better not to exceed the filter screen of the control box (about 2/3); put small amount of new fuel into the burning chamber, and it is best that the fuel covers the ignition rod 1~2 layers in a pyramid shape.
  • Page 16 •Open the upper cover of the control box, remove the residual fuel from the box and keep it properly for next use; •Let the grill continue to work 5 to ten minutes to discharge the fuel in the feeder; •Next, click Power button to turn off the device, but do not unplug the power right now. At this time, the cooling fan will continue to work for 5 minutes until the fuel is burned off and extinguished.
  • Page 17: Button Function Description

    8. Button Function Description This is the power button of the device(Power indication function included). The indication is off when the device is off . The indication of blue light is on when the device is on. This button is the unit switch button. The Fahrenheit temperature is displayed by default.When it is on, it can display Celsius temperature, and it can be switched back to Fahrenheit.
  • Page 18 Position temperature indication, show S,200,225,250,300,350,400,450,475,H Actual temperature for PROBE 1 and PROBE 2 . Actual temperature for grill body probe. Fan Work Fan start working after machine starts. Fan will keep running for 10 min after machine shut off or temperature decrease to 130F Fire Rod Work 1) First ignition, keep pressing the power button, the ignitionrodwill run for 8 min after motor running 1 min.
  • Page 19: Trouble Shooting

    9.Trouble Shooting Failure description Failure diagnosis trobleshooting Ignition fails There is fuel in the fire cup Turn the dial off and on and but it is not ignited try to ignite again No fuel in the fire cup because Change to smaller Pellet the fuel pellet is too large to enter the feeder The feed screw stops...
  • Page 20 WWW.MONUMENTGRILLS.COM Product Registration Card It is simple! Complete and mail your Product Registration Card with the Copy of the Receipt today! Last name: ______________ First Name: _______________ Address: _________________ City: _________ State: __________ Zip: ____________ Phone: __________ Email: ______________ Place of purchase: _______________ Model Number: ______________...

Table of Contents