Striking An Object While Plowing - Western HTS Mechanic's Manual

STRIKING AN OBJECT WHILE PLOWING

Blade Movement: Striking an
Object While Plowing
Control: None
System Response:
1. Hydraulic fl uid is trapped in the
base end of the cylinders by the
relief valves, the P/O check valve
(PC1) and solenoid cartridge
valve S2.
2. When the snowplow contacts an
object, the force of the impact
increases the hydraulic pressure
in the base end of the cylinder.
When the pressure exceeds the
relief valve pressure setting, the
relief valve opens allowing oil to
fl ow to the base of the opposite
cylinder.
Lit. No. 41467, Rev. 01
Force applied
when pushing
ANGLE RIGHT
Angle
Relief
Angle
Relief
DS
Pump
Filter
Force applied
when backdragging
ANGLE LEFT
Raise
Quill
Pump Relief
Return to Reservoir
LIFT
Lower
Scrape
Lock
S1
S2
S3
Draws Fluid
on Lower
April 15, 2021
56