Western HTS Mechanic's Manual page 19

SYSTEM OVERVIEW – HYDRAULIC UNIT
FloStat HYDRAULIC UNIT
®
The HTS™ hydraulic unit has blade
scrape lock circuitry built in. This
feature is activated when the blade
is in FLOAT. The HTS blade is raised
in approximately 4 seconds and
angled side to side in approximately
3 seconds.
Breather/
Quill
Fill Plug
Reservoir
Drain Plug
Lit. No. 41467, Rev. 01
Breather
Reservoir
Magnet
Drain Plug
Valve Manifold
Suction Filter
Motor
O-Ring
Plate Baffle Retainer Clip
Inlet Fitting
Pump
Quill
Pump Shaft Seal
Bypass Check Valve
PS Crossover Relief Valve
Scrape Lock
Solenoid Cartridge Valve
Solenoid Coil
Coil Nut
Poppet Check Valve Kit
Check Valve Pump Pressure
Crossover Relief Valve
Valve Manifold Block
Sleeve Bearing
Motor
19
April 15, 2021