PRx Performance Build Limitless Wall-Mount Rack Assembly Instructions Manual page 7

Attach Rack to Ledger Board
1. Once the ledger board is installed, place your assembled rack against the ledger board as shown
below. WARNING: Make sure you have enough ceiling height to rotate the rack up against the
ledger board without hitting the ceiling. See table below for ceiling height requirements.
1. Once the ledger board is installed, place your assembled rack against the ledger board as shown below.
WARNING: Make sure you have enough ceiling height to rotate the rack up against the ledger board
2. Make sure uprights are parallel to the wall before marking and drilling holes for mounting. Have a
without hitting the ceiling. See table below for required heights needed.
2. Make sure uprights are parallel to the wall before marking and drilling holes for mounting. Have one per- second person hold it in place while you mark the hole locations and drill pilot holes for your lag
son hold it in place while you mark the hole locations and drill pilot holes for your lag bolts using the
bolts using the 7/32" drill bit, drill to a minimum depth of 2 ½" (Figure 1).
7/32" drill bit, to a minimum depth of 2-1/2". (Figure 1)
3. Attach foot anchors to the bottom of the uprights a shown in Figure 2.
3. Attach foot anchors to the bottom of the uprights (Figure 2).
4. Bottom of uprights can now be spaced at 42" and anchored to the floor. (Hardware not supplied)
4. Make sure bottom of uprights are 42" apart before anchoring to the floor.
5. Tighten all hardware after anchoring to the floor.
5. Once rack is anchored to the floor, fully tighten all hardware.
HEIGHT REQ'D.
Rack Height Required
RACK
95-18
95-18
95-42
95-42
81-18
81-42
81-18
81-42
NOTE: If ceiling height is
less than minimum, contact
NOTE: If ceiling height is less than min.
Customer Service.
Contact Customer Service.
Attach Rack to Ledger Board
7
99"
99"
107"
107"
85"
95"
85"
95"
support@prxperformance.com 701-566-0452
support@prxperformance.com
6
6
11
10
Figure 2
Figure 2
4
10
9
9
8
5
Figure 1
Figure 1
7
6