Advertisement
Quick Links
with Universal Security Holder & Universal Security Enclosure
x1
1a. Setting up drill mount
Screw in base plate from below
with hardware as shown to the left
1b. Setting up kiosk
Install (4) screws with base plate
from below as shown
Adjustable Table Mount
PAD-VPOS2BC
INSTRUCTION - MANUAL
Contents:
x1
Instructions:
x1
x2
Drill in nails to the table as shown
888-733-4448
x4
x8
x8
x1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for CTA PAD-VPOS2BC
Summary of Contents for CTA PAD-VPOS2BC
- Page 1 Adjustable Table Mount with Universal Security Holder & Universal Security Enclosure PAD-VPOS2BC INSTRUCTION - MANUAL Contents: Instructions: 1a. Setting up drill mount Screw in base plate from below Drill in nails to the table as shown with hardware as shown to the left 1b.
- Page 2 2. Installing Enclosure Screw in (4) screws from the front through the enclosure and VESA while holding the hex nuts from behind until secured and tightened (Shown Above) **TABLETS NOT INCLUDED Using the provided tool screw in (4) screws from the front around the security holder and hold the hex nuts from behind with fingers until secured and tightened (Shown Above)
Need help?
Do you have a question about the PAD-VPOS2BC and is the answer not in the manual?
Questions and answers