Table of Contents
Advertisement
Available languages
Available languages
50
000 – 255
000 – 255
51
000 – 255
52
000 – 255
53
000 – 255
54
CLEANING AND MAINTENANCE
The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The
lenses, in particular, should be clean to ensure that light will be emitted at maximum brightness.
1
Disconnect the device from power and allow it to cool before cleaning.
2
Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may
damage the surface. Make sure that no liquids can enter the device.
3
The device must be dry before reapplying power.
There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as
this may result in damage. Maintenance and service operations are only to be carried out by authorized
dealers. Should you need any spare parts, please use genuine parts. Should you have further questions,
please contact your dealer.
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
1
Disconnect the device from power and allow it to cool.
2
Open the fuse holder of the mains connection with a fitting screwdriver.
3
Remove the old fuse from the fuse holder and replace it with a new fuse.
4
Carefully push the fuse holder back into its position before reapplying power.
PROTECTING THE ENVIRONMENT
Disposal of old equipment
When to be definitively put out of operation, take the product to a local recycling plant for a
disposal which is not harmful to the environment. Devices marked with this symbol must not be
disposed of as household waste. Contact your retailer or local authorities for more information.
Remove any inserted batteries and dispose of them separately from the product.
Green 0-100%
Blue 0-100%
Red 0-100%
Green 0-100%
Blue 0-100%
26/28
Group 17
Group 18
00134564, Version 1.0
Advertisement
Table of Contents
