Front Runner TBRA020 Quick Start Manual

Front Runner TBRA020 Quick Start Manual

Under-rack table slides

Advertisement

ENG
front runner
Under-Rack Table Slides
TBRA020
READ ME !
Thank you for purchasing Front Runner Under Rack Table Slides.
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the components received.
Refer to Page 2 for a list of all the components, quantities and tools required.
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this product.
TBRA020_REV_A02
1
© 2020 FRONT RUNNER VEHICLE OUTFITTERS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TBRA020 and is the answer not in the manual?

Questions and answers

Summary of Contents for Front Runner TBRA020

  • Page 1 FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL. NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
  • Page 2 M8 Nyloc Nut 10 X M8 Nut Cap Table Latch T-Slot Rubber M6 Nyloc Nut M6 x 12 x 1SS Flat Washer Uni Screw Cap M6 x 12 Button Head Bolt FIGURE 1.1 TBRA020_REV_A02 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 3 Rack and insert it into the rear channel of the first slat by pinching / squeezing the sides of the rubber together and pushing / rolling the Rubber into channel as shown. TBRA020_REV_A02 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 4 A small pad lock can be used through the hole in the Latch Release should you wish to lock the table. Push Up To Open TBRA020_REV _A02 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 5 The Table Slides are slotted left to right to enable adjustment. Space the two Table Slides 750mm or 550mm apart and tighten all the Nyloc Nuts. Place a M8 Nut Cap (Item 6) over each Nyloc Nut. © 2020 FRONT RUNNER VEHICLE OUTFITTERS TBRA020_REV _A02...
  • Page 6 A small padlock can be used through the hole in the Latch Release should you wish to lock the table. Push Up To Open TBRA020_REV _A02 © 2020 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 7 Congratulations! You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner Dealer in person or online. Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam...

Table of Contents