Front Runner TBRA034 Manual

Front Runner TBRA034 Manual

Drop down table

Advertisement

Quick Links

ENG
front runner
Drop down table
TBRA034

READ ME!

Thank you for purchasing a Front Runner Drop Down Table.
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the included components.
Refer to Page 2 for a list of all the components, quantities and tools required.

IMPORTANT WARNING!

IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
Please call us if you have any questions about the installation of this product.
TBRA034_REV_A00
1
© 2021 FRONT RUNNER VEHICLE OUTFITTERS

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TBRA034 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Front Runner TBRA034

  • Page 1 FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL. NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
  • Page 2 Spacer 6.2 x 10 x 30 M6 x 12 x 1 Flat Washer M6 x 12 Button Head M6 Nyloc Nut Jack Nut Tool M6 x 30 Button Head Support Bracket For Jeep JL FIGURE 1.1 TBRA034_REV_A00 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 3 2.2 Drill 5mm pilot holes on the marks made, using light pressure and taking care only to drill through the interior panel. Widen the holes to 12mm. 12mm TBRA034_REV_A00 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 4 fit to the table's shape. JEEP JL INSTALLATION Remove the trim panel from the rear door by carefully unclipping it with a panel tool or other similar tool. TBRA034_REV_A00 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 5 On the inside of the smaller top trim panel, locate the two round bosses shown. punch marks Using an 5mm drill bit, drill pilot holes in the center of each boss. Widen the holes using a 10mm drill bit. Bosses TBRA034_REV_A00 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 6 Secure the Drop Down Table to the rear door using M6 x 50 Button Head Bolts, M6 Spring Washers and M6 x 19 x 1 Flat Washers (Items 5, 6 & 7) as shown. TBRA034_REV_A00 © 2021 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 7 Congratulations! You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner dealer in person or online. Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam...

Table of Contents