Installing The Oil Cooler Hoses-Oil Hoses, 150-P - Waterous CAFS-CP-2 Series Installation, Operation And Maintenance Manual

Safety Introduction
Installing the Oil Cooler Hoses—Oil Hoses, 150-P
1
2
Product Overview
4
3
1
Installation Operation
3
|
72 107
Maintenance Troubleshooting
Use the illustration and instructions to install the oil
hoses for the oil cooler.
1 Install the fittings (#8 FJIC) onto the compressor
and oil cooler.
2 Install the 1/2 inch hydraulic hose into the
fittings (#8 FJIC).
3 Install the fittings (#8 FJIC) onto the oil cooler
and sump.
4 Install the 1/2 inch hydraulic hose into the
fittings (#8 FJIC).