Table of Contents
Advertisement
Safety
Introduction
Adding Oil to the Sump
Product Overview
1
4
Installation
Operation
2
3
5
|
94
107
Maintenance
Troubleshooting
Use the illustrations and instructions to add oil to
the sump. Purge the pressure from the system
before adding the oil.
High Pressure
• Liquid ejected at high
pressure can cause
serious injury.
• Purge all pressure before
servicing.
Open the pressure relief valve to make sure
that you purge the pressure from the system
before beginning the procedure.
1 Use the sight window to approximate the
amount of oil in the sump.
2 When all pressure has been purged from the
system, remove the oil fill cap.
3 Add oil to the sump.
Note:
After pouring some oil into the sump,
allow it to settle before adding more to
avoid over-filling.
4 Add oil until it reaches halfway up the sight
window.
5 Install the oil fill cap.
Advertisement
Table of Contents
