Dish Network DuoDVR ViP 722k User Manual page 93

Chapter 10
Controlling Other Components
Controlling a Tuner or Amplifier
Use the following remote control buttons to control a tuner or amplifier. When the remote
control is set up as described on pages 76 and 84, press the AUX mode button to set the
remote to AUX mode. The AUX mode button will stay lit for two seconds to show you've
set the remote to AUX mode. Make sure to keep the remote in AUX mode to use the
following buttons.
Switching Between TV and Tuner/Amplifier Volume
Adjustment
When the remote control is setup to operate your TV, the VOLUME and MUTE buttons
will adjust your TV volume. If you prefer the volume and mute functions of the remote
control to adjust the volume of a remote-controllable audio tuner or amplifier instead of the
TV, this capability can be set up using the AUX mode of the remote control.
To set the remote to adjust the tuner/amplifier volume (steps 1-5 set up the remote and
steps 6-7 make sure the remote is set up correctly):
84
To use the features described in this section, make sure
you are in AUX mode by pressing the AUX Mode button.
Power
Turns the
tuner/amplifier
on and off
Volume & Mute Buttons
Control tuner/amplifier
volume
AUX Mode
Press this
button for
AUX Mode
Select/Arrows
Button
Channel up/down
with the Arrow buttons.
Change tuner/amplifier
inputs with the Select
button
AUX