Questions; Tips - Dish Network DuoDVR ViP 722k User Manual

Chapter 2

Questions

While in the Text Field
When the cursor is in the text field:
Q
UESTIONS
• Why would I want to put the receiver in Single Mode? When the satellite receiver
is in Single Mode, you can use the PIP functions.
• How can I watch and use the DVR functions on the same program on all of the
TVs in my house? Put the receiver in Single Mode (page 15) and then enable
Shared View (page 90).
T
IPS
• You can use the Front Panel Locks to prevent the mode from being changed
accidentally. See page 49 for instructions.
• The only way to turn off the TV2 outputs is by pressing POWER on Remote Control 2.
• In Dual Mode, Remote Control 1 is used to control TV1 menus on the nearby TV.
Remote Control 2 is used to control TV2 menus on the remote TVs.
• If you would like to put the receiver in a remote location (such as a closet or cabinet),
be sure to get the replacement remote control that uses UHF Pro signals to control
TV1. Call your DISH Network retailer or go to www.dishnetwork.com, select Our
Products, and then click on Accessories.
• To use Remote Control 2, be sure to attach the Remote Control Antenna. See
page 17 for details.
• On Remote Control 2, press FORMAT/* to change the aspect ratio (display shape) of
HD channels displayed on remote TV(s).
24
• Press the LEFT ARROW to delete characters.
• Press FORMAT/* to backspace without deleting characters.
• Press 0 to enter a blank space, such as between words.
• Use the RIGHT ARROW to forward space without deleting characters.