Silk'n Tightra H2401 User Manual page 19

2. For external mode treatments, turn on the device by long
pressing the control button (#3), then short press it 3
times. The external mode will be active, and the device will
be set to energy level 1. The treatment mode indicator light
(#4) will be on (constant white). You will feel a vibration
and the device is ready for use.
3. Lie down and make yourself comfortable. Start your
treatment at energy level 1.
4. Hold the base of the device and place the 3 silver-colored
electrodes (#6), (#7) on the labia. The triangular shape of
the side with the silver-colored electrodes (#6), (#7) will
help you position the device correctly.
When the electrodes (#6), (#7) are in good contact with
5.
the skin, and you are moving the device, you will feel
heat emitted from the electrodes (#6), (#7). Keep moving
the device slowly but firmly across the skin. If there is no
movement, the Bi-Polar RF energy will not work.
During the treatment, you will feel a vibration approximately
Z
once a minute.
17
EN