Table of Contents
Advertisement
5.
If after 5 minutes you feel comfortable with the heat, move
to energy level 2 by short pressing the control button (#3).
To use energy level 3 (high), short press the control button
(#3) one more time.
EN
6.
Keep the device in place for 20 minutes. We recommend
that you lie still and do not move about. However, it's good
to rotate the device from time to time so that the energy
keeps flowing across the electrodes (#6), (#7). After 20
minutes the device will shutdown.
In cases of pain or discomfort:
Z
y
y
7.
At the end of the treatment, remove the device, and wipe
the external skin around the vagina with a clean dry towel,
or wipes specifically for the vaginal area, to remove any gel
residue.
8.
Clean the device (see section 7. Cleaning, maintenance &
storage).
6.3 External mode treatment
Before use, the skin should be shaven, clean, dry and free of any
powders, antiperspirants or deodorants. Also, be sure that the
skin is not red or inflamed.
1.
Apply a small amount of the gel supplied with the device
to the 3 silver-colored electrodes (#6),
need to apply gel internally.
If you are using energy levels 2 or 3, reduce the energy
by pressing the control button (#3) 1 or 2 times. Wait
5 minutes for the heat to reduce.
If you are already using energy level 1, remove the
device and wait until you feel OK before using the
device again.
(#7).
16
There is no
Advertisement
Table of Contents
