Installation; Connect The Devices - HMS Networks Anybus Ewon Flexy 205 Application Note

Connect Flexy 205 to Internet via Bolt LTE and Bolt Ethernet
RJ45

4. Installation

4.1. Connect the Devices

A. Ewon Flexy 205
B. Anybus PoE Injector 12-57VDC
C. Anybus Bolt LTE
D. Anybus Bolt RJ45 PoE
Figure 3. Connect cables
Connect cables
1. Connect an Ethernet cable between the Flexy 205 WAN port and the PoE Injector Data IN port.
2. Connect an Ethernet cable between the PoE Injector PoE port and the Bolt LTE Ethernet port.
3. Connect an Ethernet cable between the Flexy 205 LAN port and the PoE Injector Data IN port.
4. Connect an Ethernet cable between the PoE Injector PoE port and the Bolt RJ45 PoE Ethernet port.
Page 6 of 16
Installation
SCM-1202-180 1.1