Page 1
Glass Polisher 7013.2400 User Manual Gebruikershandleiding Gebrauchsanweisung Le mode d’emploi...
Page 2
CONTENT ENGLISH Technical specifications ............................3 Installation ................................3 Operating Instruction.............................. 4 Cleaning the external surface ..........................4 Replacing the brushes ............................. 4 Problems and solutions ............................5 Wiring diagram ............................... 5 Spare parts ................................6 www.combisteel.com...
Page 3
12.5 Amp Installation 1. Installed the Air tube on the machine and screwed. 2. Insert the shortest brush on the center roller 3. Insert the remaining 4 brushes on the rollers Plug in and it is now ready to use. www.combisteel.com...
Page 4
Mount the new brushes one at a time by inserting them into their slots and rotating them clockwise to fix them in place (until the snap in place.) Connect the machine to the power supply and press the PN/OFF switch. www.combisteel.com...
Page 5
If the polisher doesn’t work, Please check one by one as below: 1. Plug the machine into a grounded outlet. 2. Turn the power switch on. 3. Be sure the machine is plugged and the brushes are properly fixed. 4. Check the air blower. Wiring diagram www.combisteel.com...
Need help?
Do you have a question about the 7013.2400 and is the answer not in the manual?
Questions and answers